UNI-1045
Cadmium Free 45% Silver Solder
|
 |
- Broad
melting range
- Well
suited to side clearances
- Popular
in electrical, food and dairy industries
- Ideal
for brass parts
-
Ideal for brazing the following base metals: Brass,Steel,
Nickel and Nickel Alloys, Copper and Copper Alloys
|
Include thin flowing applications on copper, nickel, carbon,
alloy steels as well as carbide and stainless steels, for the
joining of dissimilar metals. Excellent for delicate parts such
as light gauge metals and heat treated parts of ferrous and
nonferrous alloy. |
| Technical
Data |
| Nominal
Analysis |
|
| 45%
Silver, 30% Copper, 25% Zinc |
|
| Tensile
Strength |
69,000
PSI (54Kg/MM2)
|
| Solidus |
1250°F
(677°C)
|
| Liquidus |
1370°F
(743°C)
|
| Color
as brazed |
Yellow
White |
| Diameter
(in) |
1/16"
3/32" |
| (mm) |
1.6mm 2.5mm |
| Specifications |
|
| AWS |
A5.8
Class BAg-5
|
| ASME |
SAF5.8
Class BAg/5
|
| FED. |
QQB65A
Grade BAg-5(I)
|
|
| Procedure |
| Clean
the joint area thoroughly, maximum strengths are achieved if
the joint clearance does not exceed .003 inches. Paint UNI-1000
flux on parts before assembly. Use jigs and fixtures to maintain
alignment. With a slight carburizing flame heat parts broadly
until flux becomes clear and fluid. Melt a small amount of alloy
in the joint. Continue heating until a fillet has been formed
on both sides of the joint. Keep torch in constant motion. Allow
part to cool slowly. Remove flux residue with warm water. |
