UNI-1035
Cadmium Free 35% Silver Brazing Alloy
|
 |
- Sluggish
flow characteristics
- Well
suited for carbide tip brazing onto cutting tools
- Most
popular for brazing steam turbine blades made of 403
or 410 stainless steel
- Ideal
for brazing the following base metals: Steel,
Copper and Copper Alloys, Nickel and Nickel Alloys
|
|
| Technical
Data |
| Nominal
Analysis |
|
| Silver
35%, Copper 32%, Zinc 33% |
|
| Liquidus |
1350°F
(732°C)
|
| Solidus |
1150°F
(621°C)
|
| Flowpoint |
1350°F
(732°C)
|
| Specifications |
| AWS |
5.8
Class B CuP5
|
| ASTM |
A
260
|
| FED. |
QQ-B-650B
|
|
| Procedure |
| Clean
surface thoroughly. Pre-flux the part with UNI-1000 flux. Preheat
the entire assembly broadly and rapidly with a neutral oxy/fuel
flame. When the flux has liquefied, apply the alloy along the
joint boundary until and adequate size fillet is formed. Can
be used with Uniweld's Thruster® Gas/Air torch. |
